Aquadrive - Antivibration System

CV 05 Application examples Custom-length CV 05 driveshaft is available in lengths from 150 mm (from 240 mm with tubeshaft design). Maximum length depends on shaft rpm. Moduline B10 CVB 05.10 Rated power kW / HP Crankshaft rpm Gearbox ratio Sailing boat 33 (45) 3800 2.6:1 Displacement motorboat 26 (35) 2600 3.0:1 L= min. 240 ± 12 Ø 94 Note: Above rating examples are based on optimum conditions with 2° for each CV joints. In case a CV joint will run at an angle greater than 2°, the max permitted power must be reduced (normally by 8-9% for each degree over 2°). The maximum allowable joint angle is 4-8° depending on shaft rpm. Propeller shaft options 3 / 4 " 20 mm 22 mm 7 / 8 " 25 mm 1" 1 1 / 8 " 30 mm 1 1 / 4 " 32 mm 35 mm 1 1 / 2 " 40 mm All B10 systems are also available with ange coupling to suit standard BW 5” propeller ange. Please contact our technical department to assist you in selecting a suitable Aquadrive system for your application. B10 standard version accepts following propeller shaft ØA: Oversize version with external clamp mechanism suits shaft diameters: 1 3 / 4 " 45 mm 50 mm 2 " 8 No noise Max static torque (ØA=20 mm): 1034 Nm / 763 lbft Max propeller shaft revolutions: 4000 rpm Max continuous propeller thrust: 11 kN / 2475 lbf 191 104.5 130 ± 16 M 10 200 145 100 Standard-Variante zur freien Platzierung Farben OHP Grün Hex #006664

RkJQdWJsaXNoZXIy ODE2ODU=