Aquadrive - Antivibration System

Moduline B10 No noise Propeller shaft options 3 / 4 " 20 mm 22 mm 7 / 8 " 25 mm 1" 1 1 / 8 " 30 mm 1 1 / 4 " 32 mm 35 mm 1 1 / 2 " 40 mm All B10 systems are also available with ange coupling to suit standard BW 5” propeller ange. Please contact our technical department to assist you in selecting a suitable Aquadrive system for your application. B10 standard version accepts following propeller shaft ØA: Oversize version with external clamp mechanism suits shaft diameters: 1 3 / 4 " 45 mm 50 mm 2 " 10 232 106 170 ± 16 M 10 145 200 111.5 Custom-length CV 15 driveshaft is available in lengths from 170 mm (from 270 mm with tube- shaft design). Maximum length depends on shaft rpm. CV 15 CVB 15.10 Rated power kW / HP Crankshaft rpm Gearbox ratio Planing boat 114 (155) 3800 2.0:1 Semi-displacement motorboat 96 (130) 3300 2.2:1 Sailing boat 85 (115) 3300 2.6:1 Displacement motorboat 66 (90) 2600 3.0:1 Note: Above rating examples are based on optimum conditions with 2° for each CV joints. In case a CV joint will run at an angle greater than 2°, the max permitted power must be reduced (normally by 8-9% for each degree over 2°). The maximum allowable joint angle is 4-8° depending on shaft rpm. L= min 270 ± 16 Ø 108 Application examples Max static torque (ØA=1 1 / 4 ”): 1625 Nm / 1200 lbft Max propeller shaft revolutions: 4000 rpm Max continuous propeller thrust: 11 kN / 2475 lbf Standard-Variante zur freien Platzierung Farben OHP Grün Hex #006664

RkJQdWJsaXNoZXIy ODE2ODU=